Yes. These are complete 5.7L HEMI exhaust manifold kits for both driver and passenger sides with hardware and gaskets.
Replacing warped or cracked manifolds, failed gaskets, and broken manifold studs is one of the most common fixes for the 5.7 HEMI exhaust tick.
These kits are designed as install-ready solutions and include the needed manifold installation hardware listed on the product pages.
Match by body style and year: Ram 1500 DT (2019–2024) or Ram 1500 DS Classic (2009–2024). The DT kit also covers Durango and Grand Cherokee 5.7L applications; the DS kit covers select 2500 and 3500 years.
No. Depending on the kit, fitment also extends into Dodge Durango, Jeep Grand Cherokee, and select Ram HD applications.
Jump to: Common problems • Vehicle applications • Symptoms • What to replace • FAQs
The most common search intent around the 5.7 HEMI exhaust manifold is usually tied to ticking noise, broken manifold bolts or studs, warped flanges, and gasket leaks. This is especially common on higher-mileage Ram 1500 5.7 exhaust manifold applications and vehicles that see repeated heat cycles.
Most owners describe it as a 5.7 HEMI exhaust tick on cold start that can quiet down as the engine warms. Other symptoms can include exhaust smell, visible soot around the manifold, broken bolts, or a persistent leak under load.
A proper 5.7 HEMI exhaust manifold replacement often includes the manifolds themselves, fresh gaskets, replacement hardware, and attention to sealing surfaces. Customers commonly search for 5.7 HEMI manifold bolts or Ram 1500 HEMI exhaust manifold bolts because the hardware is often part of the failure.
This collection is built to target the most searched Ram, Dodge, and Jeep 5.7L HEMI exhaust manifold applications. Use the table below to narrow down your fitment before ordering.
| Make | Model | Engine | Years | Platform / Notes | Kit |
|---|---|---|---|---|---|
| Ram | 1500 | 5.7L HEMI | 2019–2024 | DT body style | DT Kit |
| Ram | 1500 Classic | 5.7L HEMI | 2019–2024 | DS Classic body style | DS Kit |
| Ram | 1500 | 5.7L HEMI | 2009–2018 | DS body style | DS Kit |
| Ram | 2500 | 5.7L HEMI | 2009–2018 | DJ platform coverage per product | DS Kit |
| Ram | 3500 | 5.7L HEMI | 2013–2018 | D2 platform coverage per product | DS Kit |
| Ram | 3500 Cab Chassis | 5.7L HEMI | 2011–2015 | DC platform coverage per product | DS Kit |
| Dodge | Durango | 5.7L HEMI | 2011–2022 | Per DT product fitment | DT Kit |
| Jeep | Grand Cherokee | 5.7L HEMI | 2011–2022 | Per DT product fitment | DT Kit |
Repeated heat cycles can contribute to warped manifolds, leaking gaskets, and broken manifold hardware, especially on older trucks and hard-worked daily drivers.
The most common issue is the HEMI tick, often caused by a leak at the manifold gasket or a broken bolt or stud.
Many customers replace both sides during the same repair because the opposite side may already have similar wear, heat cycling, or hardware fatigue.
Yes, but the correct kit depends on whether your truck is a DS / DS Classic or DT body style.
Yes, the DT-linked kit covers applicable Dodge Durango 5.7L years shown on the product listing.
Yes, the DT-linked kit also covers applicable Jeep Grand Cherokee 5.7L HEMI years shown on the product listing.
These are complete replacement-oriented kits and include hardware details on the product page. Customers searching for 5.7 HEMI manifold bolts or 5.7 HEMI manifold studs should review the included components list on each product.
DT and DS refer to different Ram 1500 body/platform generations. Picking the correct one is critical for manifold fitment.
Yes. An exhaust leak can affect noise, drivability, and overall exhaust sealing, and can become more noticeable under acceleration or cold-start conditions.
Yes. Fresh gaskets are a normal part of a proper manifold replacement and help restore sealing at the flange.
Instead of burying the trust signals, this page surfaces them right where customers are researching 5.7 HEMI exhaust manifold replacement options. These live review badges help shoppers compare the DT and DS/HD kits quickly.
Best fit for newer DT Ram 1500 trucks plus the linked 5.7L SUV applications.
Best fit for older DS and HD 5.7L HEMI applications where broken hardware and leaks are common.
Direct-fit complete kit for the newer 5.7L HEMI applications covered on the product page.
Direct-fit complete kit for DS Classic and the covered 5.7L Ram HD applications.
Use Monster support tools to confirm the right replacement before ordering.
